adecathe
Member
I've recently started doing long (50-100 mile) bike rides, and would like to use my glucose sensor (Paradigm) while riding to help monitor my BSs. The problem- I have trouble keeping it in place- I usually lose the sensor insertion site within an hour of riding because the adesive fails.
I've tried preping with Skin Prep, and all kinds of extra tape, etc. Any ideas for keeping this gadget in place and operable?
NDXC
Member
where are you attaching the sensor?? it could be that the adhesive gets extra stretch or gets squished from flexing forward during riding. i had similar problems with the first sensor i put in which was too close to my stomach crease. (unfortunatly i had more problems bending forward to study than bike).
good luck!
thats good info .Thanks
Colleen
Member
Wondering if you had any success with advice above? My 20 year old son recently started Jiu Jitsu and is getting incredibly frustrated. His insertion site falls out daily. At present he is using Skin Tac, Torbot Cement and (2) IV 3000. I'll definitely look into the Tegaderm Film and suggesting he move the site (he only switches from left/right side of stomach). Thank you so much, to all!
Excellent, I just passed this onto a colleague who was doing a little research on that.
_________________________________________________________
Come visit the author latest websites on cheap jerseys
and cheap nfl jerseys.you can get what you want.
You must log in to post.
